diff options
Diffstat (limited to '.config')
| -rw-r--r-- | .config/aerc/accounts.conf | 22 | ||||
| -rw-r--r-- | .config/aerc/aerc.conf | 576 | ||||
| -rw-r--r-- | .config/aerc/binds.conf | 145 | ||||
| -rw-r--r-- | .config/aerc/stylesets/gruvbox | 83 |
4 files changed, 826 insertions, 0 deletions
diff --git a/.config/aerc/accounts.conf b/.config/aerc/accounts.conf new file mode 100644 index 0000000..02e2772 --- /dev/null +++ b/.config/aerc/accounts.conf @@ -0,0 +1,22 @@ +[Fastmail] +source = maildir://~/.mail/Fastmail/ +outgoing = msmtp-enqueue.sh --read-envelope-from +default = Inbox +folders-sort = Inbox +folders-exclude = +from = Justine Smithies <justine@smithies.me.uk> +copy-to = Sent +check-mail-cmd = mbsync -q fastmail && msmtp-runqueue.sh +check-mail = 5m +check-mail-timeout = 10s + +[Gmail] +source = maildir://~/.mail/gmail/ +outgoing = msmtp-enqueue.sh --read-envelope-from +default = INBOX +folders-exclude = [Gmail] +from = Justine Smithies <justinesmithies@gmail.com> +copy-to = [Gmail]/Sent Mail +check-mail-cmd = mbsync -q gmail && msmtp-runqueue.sh +check-mail = 5m +check-mail-timeout = 10s diff --git a/.config/aerc/aerc.conf b/.config/aerc/aerc.conf new file mode 100644 index 0000000..f04decd --- /dev/null +++ b/.config/aerc/aerc.conf @@ -0,0 +1,576 @@ +# +# aerc main configuration + +[general] +# +# Used as a default path for save operations if no other path is specified. +# ~ is expanded to the current user home dir. +# +#default-save-path= + +# If set to "gpg", aerc will use system gpg binary and keystore for all crypto +# operations. If set to "internal", the internal openpgp keyring will be used. +# If set to "auto", the system gpg will be preferred unless the internal +# keyring already exists, in which case the latter will be used. +# +# Default: auto +#pgp-provider=auto + +# By default, the file permissions of accounts.conf must be restrictive and +# only allow reading by the file owner (0600). Set this option to true to +# ignore this permission check. Use this with care as it may expose your +# credentials. +# +# Default: false +#unsafe-accounts-conf=false + +# Output log messages to specified file. A path starting with ~/ is expanded to +# the user home dir. When redirecting aerc's output to a file using > shell +# redirection, this setting is ignored and log messages are printed to stdout. +# +log-file=~/aerc.log + +# Only log messages above the specified level to log-file. Supported levels +# are: trace, debug, info, warn and error. When redirecting aerc's output to +# a file using > shell redirection, this setting is ignored and the log level +# is forced to trace. +# +# Default: info +#log-level=info + +# Set the $TERM environment variable used for the embedded terminal. +# +# Default: xterm-256color +#term=xterm-256color + +# Display OSC8 strings in the embedded terminal +# +# Default: false +#enable-osc8=false + +[ui] +# +# Describes the format for each row in a mailbox view. This is a comma +# separated list of column names with an optional align and width suffix. After +# the column name, one of the '<' (left), ':' (center) or '>' (right) alignment +# characters can be added (by default, left) followed by an optional width +# specifier. The width is either an integer representing a fixed number of +# characters, or a percentage between 1% and 99% representing a fraction of the +# terminal width. It can also be one of the '*' (auto) or '=' (fit) special +# width specifiers. Auto width columns will be equally attributed the remaining +# terminal width. Fit width columns take the width of their contents. If no +# width specifier is set, '*' is used by default. +# +# Default: date<20,name<17,flags>4,subject<* +#index-columns=date<20,name<17,flags>4,subject<* + +# +# Each name in index-columns must have a corresponding column-$name setting. +# All column-$name settings accept golang text/template syntax. See +# aerc-templates(7) for available template attributes and functions. +# +# Default settings +#column-date={{.DateAutoFormat .Date.Local}} +#column-name={{index (.From | names) 0}} +#column-flags={{.Flags | join ""}} +#column-subject={{.ThreadPrefix}}{{.Subject}} + +# +# String separator inserted between columns. When the column width specifier is +# an exact number of characters, the separator is added to it (i.e. the exact +# width will be fully available for the column contents). +# +# Default: " " +#column-separator=" " + +# +# See time.Time#Format at https://godoc.org/time#Time.Format +# +# Default: 2006-01-02 03:04 PM (ISO 8601 + 12 hour time) +#timestamp-format=2006-01-02 03:04 PM +timestamp-format=Mon 2 Jan 15:04 2006 +# +# Index-only time format for messages that were received/sent today. +# If this is not specified, timestamp-format is used instead. +# +#this-day-time-format= + +# +# Index-only time format for messages that were received/sent within the last +# 7 days. If this is not specified, timestamp-format is used instead. +# +#this-week-time-format= + +# +# Index-only time format for messages that were received/sent this year. +# If this is not specified, timestamp-format is used instead. +# +#this-year-time-format= + +# +# Width of the sidebar, including the border. +# +# Default: 20 +sidebar-width=30 + +# +# Message to display when viewing an empty folder. +# +# Default: (no messages) +#empty-message=(no messages) + +# Message to display when no folders exists or are all filtered +# +# Default: (no folders) +#empty-dirlist=(no folders) + +# Enable mouse events in the ui, e.g. clicking and scrolling with the mousewheel +# +# Default: false +#mouse-enabled=false + +# +# Ring the bell when new messages are received +# +# Default: true +#new-message-bell=true + +# +# Template to use for Account tab titles +# +# Default: {{.Account}} +#tab-title-account={{.Account}} + +# Marker to show before a pinned tab's name. +# +# Default: ` +#pinned-tab-marker='`' + +# Template for the left side of the directory list. +# See aerc-templates(7) for all available fields and functions. +# +# Default: {{.Folder}} +#dirlist-left={{.Folder}} + +# Template for the right side of the directory list. +# See aerc-templates(7) for all available fields and functions. +# +# Default: {{if .Unread}}{{humanReadable .Unread}}/{{end}}{{if .Exists}}{{humanReadable .Exists}}{{end}} +#dirlist-right={{if .Unread}}{{humanReadable .Unread}}/{{end}}{{if .Exists}}{{humanReadable .Exists}}{{end}} + +# Delay after which the messages are actually listed when entering a directory. +# This avoids loading messages when skipping over folders and makes the UI more +# responsive. If you do not want that, set it to 0s. +# +# Default: 200ms +#dirlist-delay=200ms + +# Display the directory list as a foldable tree that allows to collapse and +# expand the folders. +# +# Default: false +#dirlist-tree=false + +# If dirlist-tree is enabled, set level at which folders are collapsed by +# default. Set to 0 to disable. +# +# Default: 0 +#dirlist-collapse=0 + +# List of space-separated criteria to sort the messages by, see *sort* +# command in *aerc*(1) for reference. Prefixing a criterion with "-r " +# reverses that criterion. +# +# Example: "from -r date" +# +#sort= + +# Moves to next message when the current message is deleted +# +# Default: true +#next-message-on-delete=true + +# Automatically set the "seen" flag when a message is opened in the message +# viewer. +# +# Default: true +#auto-mark-read=true + +# The directories where the stylesets are stored. It takes a colon-separated +# list of directories. If this is unset or if a styleset cannot be found, the +# following paths will be used as a fallback in that order: +# +# ${XDG_CONFIG_HOME:-~/.config}/aerc/stylesets +# ${XDG_DATA_HOME:-~/.local/share}/aerc/stylesets +# /usr/local/share/aerc/stylesets +# /usr/share/aerc/stylesets +# +#stylesets-dirs= + +# Uncomment to use box-drawing characters for vertical and horizontal borders. +# +# Default: " " +#border-char-vertical=" " +#border-char-horizontal=" " + +# Sets the styleset to use for the aerc ui elements. +# +# Default: default +styleset-name=gruvbox + +# Activates fuzzy search in commands and their arguments: the typed string is +# searched in the command or option in any position, and need not be +# consecutive characters in the command or option. +# +# Default: false +#fuzzy-complete=false + +# How long to wait after the last input before auto-completion is triggered. +# +# Default: 250ms +#completion-delay=250ms + +# The minimum required characters to allow auto-completion to be triggered after +# completion-delay. +# +# Default: 1 +#completion-min-chars=1 + +# +# Global switch for completion popovers +# +# Default: true +#completion-popovers=true + +# Uncomment to use UTF-8 symbols to indicate PGP status of messages +# +# Default: ASCII +#icon-unencrypted= +#icon-encrypted=✔ +#icon-signed=✔ +#icon-signed-encrypted=✔ +#icon-unknown=✘ +#icon-invalid=⚠ + +# Reverses the order of the message list. By default, the message list is +# ordered with the newest (highest UID) message on top. Reversing the order +# will put the oldest (lowest UID) message on top. This can be useful in cases +# where the backend does not support sorting. +# +# Default: false +#reverse-msglist-order = false + +# Reverse display of the mesage threads. Default order is the the intial +# message is on the top with all the replies being displayed below. The +# reverse option will put the initial message at the bottom with the +# replies on top. +# +# Default: false +#reverse-thread-order=false + +# Sort the thread siblings according to the sort criteria for the messages. If +# sort-thread-siblings is false, the thread siblings will be sorted based on +# the message UID in ascending order. This option is only applicable for +# client-side threading with a backend that enables sorting. Note that there's +# a performance impact when sorting is activated. +# +# Default: false +#sort-thread-siblings=false + +#[ui:account=foo] +# +# Enable a threaded view of messages. If this is not supported by the backend +# (IMAP server or notmuch), threads will be built by the client. +# +# Default: false +threading-enabled=true + +# Force client-side thread building +# +# Default: false +#force-client-threads=false + +# Debounce client-side thread building +# +# Default: 50ms +#client-threads-delay=50ms + +[statusline] +# +# Describes the format for the status line. This is a comma separated list of +# column names with an optional align and width suffix. See [ui].index-columns +# for more details. To completely mute the status line except for push +# notifications, explicitly set status-columns to an empty string. +# +# Default: left<*,center:=,right>* +#status-columns=left<*,center:=,right>* + +# +# Each name in status-columns must have a corresponding column-$name setting. +# All column-$name settings accept golang text/template syntax. See +# aerc-templates(7) for available template attributes and functions. +# +# Default settings +#column-left=[{{.Account}}] {{.StatusInfo}} +#column-center={{.PendingKeys}} +#column-right={{.TrayInfo}} + +# +# String separator inserted between columns. +# See [ui].column-separator for more details. +# +#column-separator=" " + +# Specifies the separator between grouped statusline elements. +# +# Default: " | " +#separator=" | " + +# Defines the mode for displaying the status elements. +# Options: text, icon +# +# Default: text +#display-mode=text + +[viewer] +# +# Specifies the pager to use when displaying emails. Note that some filters +# may add ANSI codes to add color to rendered emails, so you may want to use a +# pager which supports ANSI codes. +# +# Default: less -R +#pager=less -R +pager=bat --plain --tabs 4 --paging always --color always + +# +# If an email offers several versions (multipart), you can configure which +# mimetype to prefer. For example, this can be used to prefer plaintext over +# html emails. +# +# Default: text/plain,text/html +alternatives=text/plain,text/html + +# +# Default setting to determine whether to show full headers or only parsed +# ones in message viewer. +# +# Default: false +#show-headers=false + +# +# Layout of headers when viewing a message. To display multiple headers in the +# same row, separate them with a pipe, e.g. "From|To". Rows will be hidden if +# none of their specified headers are present in the message. +# +# Default: From|To,Cc|Bcc,Date,Subject +#header-layout=From|To,Cc|Bcc,Date,Subject + +# Whether to always show the mimetype of an email, even when it is just a single part +# +# Default: false +#always-show-mime=false + +# Parses and extracts http links when viewing a message. Links can then be +# accessed with the open-link command. +# +# Default: true +parse-http-links=true + +[compose] +# +# Specifies the command to run the editor with. It will be shown in an embedded +# terminal, though it may also launch a graphical window if the environment +# supports it. Defaults to $EDITOR, or vi. +#editor= + +# +# Default header fields to display when composing a message. To display +# multiple headers in the same row, separate them with a pipe, e.g. "To|From". +# +# Default: To|From,Subject +#header-layout=To|From,Subject + +# +# Specifies the command to be used to tab-complete email addresses. Any +# occurrence of "%s" in the address-book-cmd will be replaced with what the +# user has typed so far. +# +# The command must output the completions to standard output, one completion +# per line. Each line must be tab-delimited, with an email address occurring as +# the first field. Only the email address field is required. The second field, +# if present, will be treated as the contact name. Additional fields are +# ignored. +# +# This parameter can also be set per account in accounts.conf. +#address-book-cmd= + +# Specifies the command to be used to select attachments. Any occurence of '%s' +# in the file-picker-cmd will be replaced the argument <arg> to :attach -m +# <arg>. +# +# The command must output the selected files to standard output, one file per +# line. +#file-picker-cmd= + +# +# Allow to address yourself when replying +# +# Default: true +#reply-to-self=true + +# +# Warn before sending an email that matches the specified regexp but does not +# have any attachments. Leave empty to disable this feature. +# +# Uses Go's regexp syntax, documented at https://golang.org/s/re2syntax. The +# "(?im)" flags are set by default (case-insensitive and multi-line). +# +# Example: +# no-attachment-warning=^[^>]*attach(ed|ment) +# +#no-attachment-warning= + +# +# When set, aerc will generate "format=flowed" bodies with a content type of +# "text/plain; format=flowed" as described in RFC3676. This format is easier to +# handle for some mailing software, and generally just looks like ordinary +# text. To actually make use of this format's features, you'll need support in +# your editor. +# +#format-flowed=false + +[multipart-converters] +# +# Converters allow to generate multipart/alternative messages by converting the +# main text/plain part into any other MIME type. Only exact MIME types are +# accepted. The commands are invoked with sh -c and are expected to output +# valid UTF-8 text. +# +# Example (obviously, this requires that you write your main text/plain body +# using the markdown syntax): +#text/html=pandoc -f markdown -t html --standalone + +[filters] +# +# Filters allow you to pipe an email body through a shell command to render +# certain emails differently, e.g. highlighting them with ANSI escape codes. +# +# The commands are invoked with sh -c. The following folders are appended to +# the system $PATH to allow referencing filters from their name only: +# +# ${XDG_CONFIG_HOME:-~/.config}/aerc/filters +# ${XDG_DATA_HOME:-~/.local/share}/aerc/filters +# $PREFIX/share/aerc/filters +# /usr/share/aerc/filters +# +# The following variables are defined in the filter command environment: +# +# AERC_MIME_TYPE the part MIME type/subtype +# AERC_FORMAT the part content type format= parameter +# AERC_FILENAME the attachment filename (if any) +# AERC_SUBJECT the message Subject header value +# AERC_FROM the message From header value +# +# The first filter which matches the email's mimetype will be used, so order +# them from most to least specific. +# +# You can also match on non-mimetypes, by prefixing with the header to match +# against (non-case-sensitive) and a comma, e.g. subject,text will match a +# subject which contains "text". Use header,~regex to match against a regex. +# +text/plain=colorize +text/calendar=calendar +message/delivery-status=colorize +message/rfc822=colorize +#text/html=pandoc -f html -t plain | colorize +#text/html=html | colorize +text/html=w3m -T text/html -cols $(tput cols) -dump -o display_image=false -o display_link_number=true +#text/*=bat -fP --file-name="$AERC_FILENAME" +#application/x-sh=bat -fP -l sh +#image/*=catimg -w $(tput cols) - +image/*=img2sixel +#subject,~Git(hub|lab)=lolcat -f +#from,thatguywhodoesnothardwraphismessages=wrap -w 100 | colorize + +# This special filter is only used to post-process email headers when +# [viewer].show-headers=true +# By default, headers are piped directly into the pager. +# +.headers=colorize + +[openers] +# +# Openers allow you to specify the command to use for the :open and :open-link +# actions on a per-MIME-type basis. The :open-link URL scheme is used to +# determine the MIME type as follows: x-scheme-handler/<scheme>. +# +# {} is expanded as the temporary filename to be opened. If it is not +# encountered in the command, the temporary filename will be appened to the end +# of the command. +# +# Like [filters], openers support basic shell globbing. The first opener which +# matches the part's MIME type (or URL scheme handler MIME type) will be used, +# so order them from most to least specific. +# +# Examples: +# x-scheme-handler/irc=hexchat +# x-scheme-handler/http*=firefox +# text/html=surf -dfgms +# text/plain=gvim {} +125 +# message/rfc822=thunderbird +text/html=qutebrowser +application/x-pdf=zathura +application/pdf=zathura +application/octet-stream=zathura +image/*=imv +image/png=imv +image/jpg=imv +video/*=mpv +audio/*=mpv --no-video +text/*=vim + +[hooks] +# +# Hooks are triggered whenever the associated event occurs. + +# +# Executed when a new email arrives in the selected folder +#mail-received=notify-send "New mail from $AERC_FROM_NAME" "$AERC_SUBJECT" + +# +# Executed when aerc starts +#aerc-startup=aerc :terminal calcurse && aerc :next-tab + +# +# Executed when aerc shuts down. +#aerc-shutdown= + +[templates] +# Templates are used to populate email bodies automatically. +# + +# The directories where the templates are stored. It takes a colon-separated +# list of directories. If this is unset or if a template cannot be found, the +# following paths will be used as a fallback in that order: +# +# ${XDG_CONFIG_HOME:-~/.config}/aerc/templates +# ${XDG_DATA_HOME:-~/.local/share}/aerc/templates +# /usr/local/share/aerc/templates +# /usr/share/aerc/templates +# +#template-dirs= + +# The default template to be used for new messages. +# +# default: new_message +#new-message=new_message + +# The default template to be used for quoted replies. +# +# default: quoted_reply +#quoted-reply=quoted_reply + +# The default template to be used for forward as body. +# +# default: forward_as_body +#forwards=forward_as_body diff --git a/.config/aerc/binds.conf b/.config/aerc/binds.conf new file mode 100644 index 0000000..cd94f0a --- /dev/null +++ b/.config/aerc/binds.conf @@ -0,0 +1,145 @@ +# Binds are of the form <key sequence> = <command to run> +# To use '=' in a key sequence, substitute it with "Eq": "<Ctrl+Eq>" +# If you wish to bind #, you can wrap the key sequence in quotes: "#" = quit +<C-p> = :prev-tab<Enter> +<C-n> = :next-tab<Enter> +<C-t> = :term<Enter> +? = :help keys<Enter> + +[messages] +q = :quit<Enter> + +j = :next<Enter> +<Down> = :next<Enter> +<C-d> = :next 50%<Enter> +<C-f> = :next 100%<Enter> +<PgDn> = :next 100%<Enter> + +k = :prev<Enter> +<Up> = :prev<Enter> +<C-u> = :prev 50%<Enter> +<C-b> = :prev 100%<Enter> +<PgUp> = :prev 100%<Enter> +g = :select 0<Enter> +G = :select -1<Enter> + +J = :next-folder<Enter> +K = :prev-folder<Enter> +H = :collapse-folder<Enter> +L = :expand-folder<Enter> + +v = :mark -t<Enter> +V = :mark -v<Enter> + +T = :toggle-threads<Enter> + +<Enter> = :view<Enter> +d = :prompt 'Really delete this message?' 'delete-message'<Enter> +D = :delete<Enter> +A = :archive flat<Enter> + +C = :compose<Enter> + +rr = :reply -a<Enter> +rq = :reply -aq<Enter> +Rr = :reply<Enter> +Rq = :reply -q<Enter> + +c = :cf<space> +$ = :term<space> +! = :term<space> +| = :pipe<space> + +/ = :search<space> +\ = :filter<space> +n = :next-result<Enter> +N = :prev-result<Enter> +<Esc> = :clear<Enter> + +[messages:folder=Drafts] +<Enter> = :recall<Enter> + +[view] +/ = :toggle-key-passthrough<Enter>/ +q = :close<Enter> +O = :open<Enter> +S = :save<space> +| = :pipe<space> +D = :delete<Enter> +A = :archive flat<Enter> + +<C-l> = :open-link <space> + +f = :forward<Enter> +rr = :reply -a<Enter> +rq = :reply -aq<Enter> +Rr = :reply<Enter> +Rq = :reply -q<Enter> + +H = :toggle-headers<Enter> +<C-k> = :prev-part<Enter> +<C-j> = :next-part<Enter> +J = :next<Enter> +K = :prev<Enter> + +[view::passthrough] +$noinherit = true +$ex = <C-x> +<Esc> = :toggle-key-passthrough<Enter> + +[compose] +# Keybindings used when the embedded terminal is not selected in the compose +# view +$noinherit = true +$ex = <C-x> +<C-k> = :prev-field<Enter> +<C-j> = :next-field<Enter> +<A-p> = :switch-account -p<Enter> +<A-n> = :switch-account -n<Enter> +<tab> = :next-field<Enter> +<backtab> = :prev-field<Enter> +<C-p> = :prev-tab<Enter> +<C-n> = :next-tab<Enter> + +[compose::editor] +# Keybindings used when the embedded terminal is selected in the compose view +$noinherit = true +$ex = <C-x> +<C-k> = :prev-field<Enter> +<C-j> = :next-field<Enter> +<C-p> = :prev-tab<Enter> +<C-n> = :next-tab<Enter> + +[compose::review] +# Keybindings used when reviewing a message to be sent +y = :send<Enter> +n = :abort<Enter> +v = :preview<Enter> +p = :postpone<Enter> +q = :choose -o d discard abort -o p postpone postpone<Enter> +e = :edit<Enter> +a = :attach<space> +d = :detach<space> + +[terminal] +$noinherit = true +$ex = <C-x> + +<C-p> = :prev-tab<Enter> +<C-n> = :next-tab<Enter> + +[messages:account=gmail] +d = :prompt 'Really move this message to the trash?' mv [Gmail]/Bin<Enter> +D = :mv [Gmail]/Bin<Enter> + +[view:account=gmail] +d = :prompt 'Really move this message to the trash?' mv [Gmail]/Bin<Enter> +D = :mv [Gmail]/Bin<Enter> + +[messages:account=fastmail] +d = :prompt 'Really move this message to the trash?' mv Trash<Enter> +D = :mv Trash<Enter> + +[view:account=fastmail] +d = :prompt 'Really move this message to the trash?' mv Trash<Enter> +D = :mv Trash<Enter> diff --git a/.config/aerc/stylesets/gruvbox b/.config/aerc/stylesets/gruvbox new file mode 100644 index 0000000..a47b708 --- /dev/null +++ b/.config/aerc/stylesets/gruvbox @@ -0,0 +1,83 @@ +# should work with any terminal colorscheme, but was designed for gruvbox +# terminal colors are preferred, but hex is used for grayscale + +*.default=true + +# present in 'Send this email?' dialog +title.fg=yellow +title.bg=#303030 +title.bold=true + +# used in setup and in 'From:' etc +header.bold=true +header.fg=purple + +# decorative lines +border.fg=blue + +# requires attention +*error.bold=true +*error.fg=red +*error.blink=true +*warning.fg=yellow +*warning.blink=true +*success.fg=green + +# statusline +statusline_default.fg=gray +statusline_*.bg=#303030 + +# message list colors +msglist_deleted.fg=gray +msglist_unread.fg=#98971a +msglist_unread.bold=true +msglist_default.fg=#dedede +msglist_marked.fg=yellow +msglist_marked.reverse=true +msglist_flagged.fg=white +# msglist_flagged.bg=red +msglist_flagged.bold=true + +# inbox etc +dirlist_default.fg=#dedede +dirlist_unread.fg=white +dirlist_unread.bold=true + +# highlight selected item +*.selected.bg=#303030 +*.selected.fg=#fabd2f +*.selected.bold=true + +# primarily used in account setup +selector_default.fg=gray +selector_chooser.bold=true +selector_focused.bg=green +selector_focused.bold=true + +# command completion +completion_default.bg=#303030 +completion_gutter.bg=#303030 +completion_pill.bg=aqua + + +#dynamic +*msglist_answered.fg = #21771f + +[viewer] +header.fg=#d845c5 +header.bold=true +signature.fg=3 +signature.dim=true +diff_meta.fg=#ff0000 +diff_meta.bold=true +diff_chunk.dim=true +diff_add.fg=#00ff00 +diff_del.fg=#ff0000 +quote_1.fg=6 +quote_2.fg=7 +quote_3.fg=6 +quote_4.fg=7 +quote_3.dim=true +quote_4.dim=true +quote_x.fg=gray +quote_x.dim=true |