Updated for FreeBSD

1 files changed, 118 insertions, 904 deletions

diff --git a/posts/my-aerc-setup.md b/posts/my-aerc-setup.md
index 65312fe..b6c9fd0 100644
--- a/posts/my-aerc-setup.md
+++ b/posts/my-aerc-setup.md
@@ -1,904 +1,118 @@
-# My aerc setup
-
-Recently I was almost ready to look into installing and setting up [neomutt](https://github.com/neomutt/neomutt) when I randomly discovered [aerc](https://git.sr.ht/~rjarry/aerc) an email client for your terminal whilst browsing the www as you do. After reading up on it I soon realised that several of my online friends also used aerc having once used mutt / neomutt so decided to give it a go first and to be honest I really really love it! I'll try to document how I have set it up on my Arch system but please be warned it's still a **work in progress** and you may well give me a few pointers too.
-This is an offline setup that I have so I can read and write emails even when I'm offline and they will be queued for sending once I'm back online.
-
-**Please note that I use Gmail for my email at the moment so that's what I have configured but you could easily adapt this to suit if you follow the documentation for the various pieces of software**
-
-## First the packages I have installed to setup aerc
-
-### aerc:
-[aerc-git](https://aur.archlinux.org/packages/aerc-git)
-[dante](https://archlinux.org/packages/extra/x86_64/dante/)
-[w3m](https://archlinux.org/packages/extra/x86_64/w3m/)
-
-### SMTP:
-[msmtp-git](https://aur.archlinux.org/packages/msmtp-git)
-
-The scripts `msmtp-enqueue.sh`, `msmtp-runqueue.sh` and `msmtp-listqueue.sh` are located in `/usr/share/doc/msmtp/msmtpqueue/` and can be copied into your `~/.local/bin/` folder.
-
-### IMAP MailDir mailbox sync:
-[isync-git](https://aur.archlinux.org/packages/isync-git)
-
-### Passwords:
-[pass](https://archlinux.org/packages/extra/any/pass/)
-
-I use pass to securely store and retreive my passwords
-
-## Then the config files which are a WIP
-
-You will have to replace `your full name` and obviously your email address where I've used as an example `your@gmail.com`
-It is also noted that in the `accounts.conf` file below I use aerc to check and send anything in the mail queue every 5 minutes using the line `check-mail-cmd    = mbsync -q gmail && msmtp-runqueue.sh`.
-Although I have thought that maybe I should reverse that so it sends first and then checks for new mail ?
-
-`~/.config/aerc/accounts.conf`
-
-```
-[gmail]
-source        = maildir://~/.mail
-outgoing      = msmtp-enqueue.sh --read-envelope-from
-default       = INBOX
-folders-exclude = [Gmail]
-from          = your full name <your@gmail.com>
-copy-to       = gmail/[Gmail]/Sent Mail
-check-mail-cmd    = mbsync -q gmail && msmtp-runqueue.sh
-check-mail        = 5m
-check-mail-timeout = 10s
-```
-
-In the `aerc.conf` file below I have made a few changes for layout and especially the timestamp so that it's in a format suited to myself. I've also changed the theme to my favourite gruvbox which will more than likely get updated from time to time as I improve on my setup.
-
-`~/.config/aerc/aerc.conf`
-
-```
-#
-# aerc main configuration
-
-[general]
-#
-# Used as a default path for save operations if no other path is specified.
-# ~ is expanded to the current user home dir.
-#
-#default-save-path=
-
-# If set to "gpg", aerc will use system gpg binary and keystore for all crypto
-# operations. If set to "internal", the internal openpgp keyring will be used.
-# If set to "auto", the system gpg will be preferred unless the internal
-# keyring already exists, in which case the latter will be used.
-#
-# Default: auto
-#pgp-provider=auto
-
-# By default, the file permissions of accounts.conf must be restrictive and
-# only allow reading by the file owner (0600). Set this option to true to
-# ignore this permission check. Use this with care as it may expose your
-# credentials.
-#
-# Default: false
-#unsafe-accounts-conf=false
-
-# Output log messages to specified file. A path starting with ~/ is expanded to
-# the user home dir. When redirecting aerc's output to a file using > shell
-# redirection, this setting is ignored and log messages are printed to stdout.
-#
-log-file=~/aerc.log
-
-# Only log messages above the specified level to log-file. Supported levels
-# are: trace, debug, info, warn and error. When redirecting aerc's output to
-# a file using > shell redirection, this setting is ignored and the log level
-# is forced to trace.
-#
-# Default: info
-#log-level=info
-
-# Set the $TERM environment variable used for the embedded terminal.
-#
-# Default: xterm-256color
-#term=xterm-256color
-
-# Display OSC8 strings in the embedded terminal
-#
-# Default: false
-#enable-osc8=false
-
-[ui]
-#
-# Describes the format for each row in a mailbox view. This is a comma
-# separated list of column names with an optional align and width suffix. After
-# the column name, one of the '<' (left), ':' (center) or '>' (right) alignment
-# characters can be added (by default, left) followed by an optional width
-# specifier. The width is either an integer representing a fixed number of
-# characters, or a percentage between 1% and 99% representing a fraction of the
-# terminal width. It can also be one of the '*' (auto) or '=' (fit) special
-# width specifiers. Auto width columns will be equally attributed the remaining
-# terminal width. Fit width columns take the width of their contents. If no
-# width specifier is set, '*' is used by default.
-#
-# Default: date<20,name<17,flags>4,subject<*
-#index-columns=date<20,name<17,flags>4,subject<*
-
-#
-# Each name in index-columns must have a corresponding column-$name setting.
-# All column-$name settings accept golang text/template syntax. See
-# aerc-templates(7) for available template attributes and functions.
-#
-# Default settings
-#column-date={{.DateAutoFormat .Date.Local}}
-#column-name={{index (.From | names) 0}}
-#column-flags={{.Flags | join ""}}
-#column-subject={{.ThreadPrefix}}{{.Subject}}
-
-#
-# String separator inserted between columns. When the column width specifier is
-# an exact number of characters, the separator is added to it (i.e. the exact
-# width will be fully available for the column contents).
-#
-# Default: "  "
-#column-separator="  "
-
-#
-# See time.Time#Format at https://godoc.org/time#Time.Format
-#
-# Default: 2006-01-02 03:04 PM (ISO 8601 + 12 hour time)
-#timestamp-format=2006-01-02 03:04 PM
-timestamp-format=Mon 2 Jan 15:04 2006
-#
-# Index-only time format for messages that were received/sent today.
-# If this is not specified, timestamp-format is used instead.
-#
-#this-day-time-format=
-
-#
-# Index-only time format for messages that were received/sent within the last
-# 7 days. If this is not specified, timestamp-format is used instead.
-#
-#this-week-time-format=
-
-#
-# Index-only time format for messages that were received/sent this year.
-# If this is not specified, timestamp-format is used instead.
-#
-#this-year-time-format=
-
-#
-# Width of the sidebar, including the border.
-#
-# Default: 20
-sidebar-width=30
-
-#
-# Message to display when viewing an empty folder.
-#
-# Default: (no messages)
-#empty-message=(no messages)
-
-# Message to display when no folders exists or are all filtered
-#
-# Default: (no folders)
-#empty-dirlist=(no folders)
-
-# Enable mouse events in the ui, e.g. clicking and scrolling with the mousewheel
-#
-# Default: false
-#mouse-enabled=false
-
-#
-# Ring the bell when new messages are received
-#
-# Default: true
-#new-message-bell=true
-
-#
-# Template to use for Account tab titles
-#
-# Default: {{.Account}}
-#tab-title-account={{.Account}}
-
-# Marker to show before a pinned tab's name.
-#
-# Default: `
-#pinned-tab-marker='`'
-
-# Template for the left side of the directory list.
-# See aerc-templates(7) for all available fields and functions.
-#
-# Default: {{.Folder}}
-#dirlist-left={{.Folder}}
-
-# Template for the right side of the directory list.
-# See aerc-templates(7) for all available fields and functions.
-#
-# Default: {{if .Unread}}{{humanReadable .Unread}}/{{end}}{{if .Exists}}{{humanReadable .Exists}}{{end}}
-#dirlist-right={{if .Unread}}{{humanReadable .Unread}}/{{end}}{{if .Exists}}{{humanReadable .Exists}}{{end}}
-
-# Delay after which the messages are actually listed when entering a directory.
-# This avoids loading messages when skipping over folders and makes the UI more
-# responsive. If you do not want that, set it to 0s.
-#
-# Default: 200ms
-#dirlist-delay=200ms
-
-# Display the directory list as a foldable tree that allows to collapse and
-# expand the folders.
-#
-# Default: false
-#dirlist-tree=false
-
-# If dirlist-tree is enabled, set level at which folders are collapsed by
-# default. Set to 0 to disable.
-#
-# Default: 0
-#dirlist-collapse=0
-
-# List of space-separated criteria to sort the messages by, see *sort*
-# command in *aerc*(1) for reference. Prefixing a criterion with "-r "
-# reverses that criterion.
-#
-# Example: "from -r date"
-#
-#sort=
-
-# Moves to next message when the current message is deleted
-#
-# Default: true
-#next-message-on-delete=true
-
-# Automatically set the "seen" flag when a message is opened in the message
-# viewer.
-#
-# Default: true
-#auto-mark-read=true
-
-# The directories where the stylesets are stored. It takes a colon-separated
-# list of directories. If this is unset or if a styleset cannot be found, the
-# following paths will be used as a fallback in that order:
-#
-#   ${XDG_CONFIG_HOME:-~/.config}/aerc/stylesets
-#   ${XDG_DATA_HOME:-~/.local/share}/aerc/stylesets
-#   /usr/local/share/aerc/stylesets
-#   /usr/share/aerc/stylesets
-#
-#stylesets-dirs=
-
-# Uncomment to use box-drawing characters for vertical and horizontal borders.
-#
-# Default: " "
-#border-char-vertical=" "
-#border-char-horizontal=" "
-
-# Sets the styleset to use for the aerc ui elements.
-#
-# Default: default
-styleset-name=gruvbox
-
-# Activates fuzzy search in commands and their arguments: the typed string is
-# searched in the command or option in any position, and need not be
-# consecutive characters in the command or option.
-#
-# Default: false
-#fuzzy-complete=false
-
-# How long to wait after the last input before auto-completion is triggered.
-#
-# Default: 250ms
-#completion-delay=250ms
-
-# The minimum required characters to allow auto-completion to be triggered after
-# completion-delay.
-#
-# Default: 1
-#completion-min-chars=1
-
-#
-# Global switch for completion popovers
-#
-# Default: true
-#completion-popovers=true
-
-# Uncomment to use UTF-8 symbols to indicate PGP status of messages
-#
-# Default: ASCII
-#icon-unencrypted=
-#icon-encrypted=✔
-#icon-signed=✔
-#icon-signed-encrypted=✔
-#icon-unknown=✘
-#icon-invalid=⚠
-
-# Reverses the order of the message list. By default, the message list is
-# ordered with the newest (highest UID) message on top. Reversing the order
-# will put the oldest (lowest UID) message on top. This can be useful in cases
-# where the backend does not support sorting.
-#
-# Default: false
-#reverse-msglist-order = false
-
-# Reverse display of the mesage threads. Default order is the the intial
-# message is on the top with all the replies being displayed below. The
-# reverse option will put the initial message at the bottom with the
-# replies on top.
-#
-# Default: false
-#reverse-thread-order=false
-
-# Sort the thread siblings according to the sort criteria for the messages. If
-# sort-thread-siblings is false, the thread siblings will be sorted based on
-# the message UID in ascending order. This option is only applicable for
-# client-side threading with a backend that enables sorting. Note that there's
-# a performance impact when sorting is activated.
-#
-# Default: false
-#sort-thread-siblings=false
-
-#[ui:account=foo]
-#
-# Enable a threaded view of messages. If this is not supported by the backend
-# (IMAP server or notmuch), threads will be built by the client.
-#
-# Default: false
-threading-enabled=true
-
-# Force client-side thread building
-#
-# Default: false
-#force-client-threads=false
-
-# Debounce client-side thread building
-#
-# Default: 50ms
-#client-threads-delay=50ms
-
-[statusline]
-#
-# Describes the format for the status line. This is a comma separated list of
-# column names with an optional align and width suffix. See [ui].index-columns
-# for more details. To completely mute the status line except for push
-# notifications, explicitly set status-columns to an empty string.
-#
-# Default: left<*,center:=,right>*
-#status-columns=left<*,center:=,right>*
-
-#
-# Each name in status-columns must have a corresponding column-$name setting.
-# All column-$name settings accept golang text/template syntax. See
-# aerc-templates(7) for available template attributes and functions.
-#
-# Default settings
-#column-left=[{{.Account}}] {{.StatusInfo}}
-#column-center={{.PendingKeys}}
-#column-right={{.TrayInfo}}
-
-#
-# String separator inserted between columns.
-# See [ui].column-separator for more details.
-#
-#column-separator=" "
-
-# Specifies the separator between grouped statusline elements.
-#
-# Default: " | "
-#separator=" | "
-
-# Defines the mode for displaying the status elements.
-# Options: text, icon
-#
-# Default: text
-#display-mode=text
-
-[viewer]
-#
-# Specifies the pager to use when displaying emails. Note that some filters
-# may add ANSI codes to add color to rendered emails, so you may want to use a
-# pager which supports ANSI codes.
-#
-# Default: less -R
-#pager=less -R
-pager=bat --plain --tabs 4 --paging always --color always
-
-#
-# If an email offers several versions (multipart), you can configure which
-# mimetype to prefer. For example, this can be used to prefer plaintext over
-# html emails.
-#
-# Default: text/plain,text/html
-alternatives=text/plain,text/html
-
-#
-# Default setting to determine whether to show full headers or only parsed
-# ones in message viewer.
-#
-# Default: false
-#show-headers=false
-
-#
-# Layout of headers when viewing a message. To display multiple headers in the
-# same row, separate them with a pipe, e.g. "From|To". Rows will be hidden if
-# none of their specified headers are present in the message.
-#
-# Default: From|To,Cc|Bcc,Date,Subject
-#header-layout=From|To,Cc|Bcc,Date,Subject
-
-# Whether to always show the mimetype of an email, even when it is just a single part
-#
-# Default: false
-#always-show-mime=false
-
-# Parses and extracts http links when viewing a message. Links can then be
-# accessed with the open-link command.
-#
-# Default: true
-parse-http-links=true
-
-[compose]
-#
-# Specifies the command to run the editor with. It will be shown in an embedded
-# terminal, though it may also launch a graphical window if the environment
-# supports it. Defaults to $EDITOR, or vi.
-#editor=
-
-#
-# Default header fields to display when composing a message. To display
-# multiple headers in the same row, separate them with a pipe, e.g. "To|From".
-#
-# Default: To|From,Subject
-#header-layout=To|From,Subject
-
-#
-# Specifies the command to be used to tab-complete email addresses. Any
-# occurrence of "%s" in the address-book-cmd will be replaced with what the
-# user has typed so far.
-#
-# The command must output the completions to standard output, one completion
-# per line. Each line must be tab-delimited, with an email address occurring as
-# the first field. Only the email address field is required. The second field,
-# if present, will be treated as the contact name. Additional fields are
-# ignored.
-#
-# This parameter can also be set per account in accounts.conf.
-#address-book-cmd=
-
-# Specifies the command to be used to select attachments. Any occurence of '%s'
-# in the file-picker-cmd will be replaced the argument <arg> to :attach -m
-# <arg>.
-#
-# The command must output the selected files to standard output, one file per
-# line.
-#file-picker-cmd=
-
-#
-# Allow to address yourself when replying
-#
-# Default: true
-#reply-to-self=true
-
-#
-# Warn before sending an email that matches the specified regexp but does not
-# have any attachments. Leave empty to disable this feature.
-#
-# Uses Go's regexp syntax, documented at https://golang.org/s/re2syntax. The
-# "(?im)" flags are set by default (case-insensitive and multi-line).
-#
-# Example:
-# no-attachment-warning=^[^>]*attach(ed|ment)
-#
-#no-attachment-warning=
-
-#
-# When set, aerc will generate "format=flowed" bodies with a content type of
-# "text/plain; format=flowed" as described in RFC3676. This format is easier to
-# handle for some mailing software, and generally just looks like ordinary
-# text. To actually make use of this format's features, you'll need support in
-# your editor.
-#
-#format-flowed=false
-
-[multipart-converters]
-#
-# Converters allow to generate multipart/alternative messages by converting the
-# main text/plain part into any other MIME type. Only exact MIME types are
-# accepted. The commands are invoked with sh -c and are expected to output
-# valid UTF-8 text.
-#
-# Example (obviously, this requires that you write your main text/plain body
-# using the markdown syntax):
-#text/html=pandoc -f markdown -t html --standalone
-
-[filters]
-#
-# Filters allow you to pipe an email body through a shell command to render
-# certain emails differently, e.g. highlighting them with ANSI escape codes.
-#
-# The commands are invoked with sh -c. The following folders are appended to
-# the system $PATH to allow referencing filters from their name only:
-#
-#   ${XDG_CONFIG_HOME:-~/.config}/aerc/filters
-#   ${XDG_DATA_HOME:-~/.local/share}/aerc/filters
-#   $PREFIX/share/aerc/filters
-#   /usr/share/aerc/filters
-#
-# The following variables are defined in the filter command environment:
-#
-#   AERC_MIME_TYPE      the part MIME type/subtype
-#   AERC_FORMAT         the part content type format= parameter
-#   AERC_FILENAME       the attachment filename (if any)
-#   AERC_SUBJECT        the message Subject header value
-#   AERC_FROM           the message From header value
-#
-# The first filter which matches the email's mimetype will be used, so order
-# them from most to least specific.
-#
-# You can also match on non-mimetypes, by prefixing with the header to match
-# against (non-case-sensitive) and a comma, e.g. subject,text will match a
-# subject which contains "text". Use header,~regex to match against a regex.
-#
-text/plain=colorize
-text/calendar=calendar
-message/delivery-status=colorize
-message/rfc822=colorize
-#text/html=pandoc -f html -t plain | colorize
-#text/html=html | colorize
-text/html=w3m -T text/html -cols $(tput cols) -dump -o display_image=false -o display_link_number=true
-#text/*=bat -fP --file-name="$AERC_FILENAME"
-#application/x-sh=bat -fP -l sh
-#image/*=catimg -w $(tput cols) -
-image/*=img2sixel
-#subject,~Git(hub|lab)=lolcat -f
-#from,thatguywhodoesnothardwraphismessages=wrap -w 100 | colorize
-
-# This special filter is only used to post-process email headers when
-# [viewer].show-headers=true
-# By default, headers are piped directly into the pager.
-#
-.headers=colorize
-
-[openers]
-#
-# Openers allow you to specify the command to use for the :open and :open-link
-# actions on a per-MIME-type basis. The :open-link URL scheme is used to
-# determine the MIME type as follows: x-scheme-handler/<scheme>.
-#
-# {} is expanded as the temporary filename to be opened. If it is not
-# encountered in the command, the temporary filename will be appened to the end
-# of the command.
-#
-# Like [filters], openers support basic shell globbing. The first opener which
-# matches the part's MIME type (or URL scheme handler MIME type) will be used,
-# so order them from most to least specific.
-#
-# Examples:
-# x-scheme-handler/irc=hexchat
-# x-scheme-handler/http*=firefox
-# text/html=surf -dfgms
-# text/plain=gvim {} +125
-# message/rfc822=thunderbird
-text/html=qutebrowser
-application/x-pdf=zathura
-application/pdf=zathura
-application/octet-stream=zathura
-image/*=imv
-image/png=imv
-image/jpg=imv
-video/*=mpv
-audio/*=mpv --no-video
-text/*=vim
-
-[hooks]
-#
-# Hooks are triggered whenever the associated event occurs.
-
-#
-# Executed when a new email arrives in the selected folder
-#mail-received=notify-send "New mail from $AERC_FROM_NAME" "$AERC_SUBJECT"
-
-#
-# Executed when aerc starts
-#aerc-startup=aerc :terminal calcurse && aerc :next-tab
-
-#
-# Executed when aerc shuts down.
-#aerc-shutdown=
-
-[templates]
-# Templates are used to populate email bodies automatically.
-#
-
-# The directories where the templates are stored. It takes a colon-separated
-# list of directories. If this is unset or if a template cannot be found, the
-# following paths will be used as a fallback in that order:
-#
-#   ${XDG_CONFIG_HOME:-~/.config}/aerc/templates
-#   ${XDG_DATA_HOME:-~/.local/share}/aerc/templates
-#   /usr/local/share/aerc/templates
-#   /usr/share/aerc/templates
-#
-#template-dirs=
-
-# The default template to be used for new messages.
-#
-# default: new_message
-#new-message=new_message
-
-# The default template to be used for quoted replies.
-#
-# default: quoted_reply
-#quoted-reply=quoted_reply
-
-# The default template to be used for forward as body.
-#
-# default: forward_as_body
-#forwards=forward_as_body
-```
-
-`~/.config/aerc/binds.conf`
-
-```
-# Binds are of the form <key sequence> = <command to run>
-# To use '=' in a key sequence, substitute it with "Eq": "<Ctrl+Eq>"
-# If you wish to bind #, you can wrap the key sequence in quotes: "#" = quit
-<C-p> = :prev-tab<Enter>
-<C-n> = :next-tab<Enter>
-<C-t> = :term<Enter>
-? = :help keys<Enter>
-
-[messages]
-q = :quit<Enter>
-
-j = :next<Enter>
-<Down> = :next<Enter>
-<C-d> = :next 50%<Enter>
-<C-f> = :next 100%<Enter>
-<PgDn> = :next 100%<Enter>
-
-k = :prev<Enter>
-<Up> = :prev<Enter>
-<C-u> = :prev 50%<Enter>
-<C-b> = :prev 100%<Enter>
-<PgUp> = :prev 100%<Enter>
-g = :select 0<Enter>
-G = :select -1<Enter>
-
-J = :next-folder<Enter>
-K = :prev-folder<Enter>
-H = :collapse-folder<Enter>
-L = :expand-folder<Enter>
-
-v = :mark -t<Enter>
-V = :mark -v<Enter>
-
-T = :toggle-threads<Enter>
-
-<Enter> = :view<Enter>
-d = :prompt 'Really delete this message?' 'delete-message'<Enter>
-D = :delete<Enter>
-A = :archive flat<Enter>
-
-C = :compose<Enter>
-
-rr = :reply -a<Enter>
-rq = :reply -aq<Enter>
-Rr = :reply<Enter>
-Rq = :reply -q<Enter>
-
-c = :cf<space>
-$ = :term<space>
-! = :term<space>
-| = :pipe<space>
-
-/ = :search<space>
-\ = :filter<space>
-n = :next-result<Enter>
-N = :prev-result<Enter>
-<Esc> = :clear<Enter>
-
-[messages:folder=Drafts]
-<Enter> = :recall<Enter>
-
-[view]
-/ = :toggle-key-passthrough<Enter>/
-q = :close<Enter>
-O = :open<Enter>
-S = :save<space>
-| = :pipe<space>
-D = :delete<Enter>
-A = :archive flat<Enter>
-
-<C-l> = :open-link <space>
-
-f = :forward<Enter>
-rr = :reply -a<Enter>
-rq = :reply -aq<Enter>
-Rr = :reply<Enter>
-Rq = :reply -q<Enter>
-
-H = :toggle-headers<Enter>
-<C-k> = :prev-part<Enter>
-<C-j> = :next-part<Enter>
-J = :next<Enter>
-K = :prev<Enter>
-
-[view::passthrough]
-$noinherit = true
-$ex = <C-x>
-<Esc> = :toggle-key-passthrough<Enter>
-
-[compose]
-# Keybindings used when the embedded terminal is not selected in the compose
-# view
-$noinherit = true
-$ex = <C-x>
-<C-k> = :prev-field<Enter>
-<C-j> = :next-field<Enter>
-<A-p> = :switch-account -p<Enter>
-<A-n> = :switch-account -n<Enter>
-<tab> = :next-field<Enter>
-<backtab> = :prev-field<Enter>
-<C-p> = :prev-tab<Enter>
-<C-n> = :next-tab<Enter>
-
-[compose::editor]
-# Keybindings used when the embedded terminal is selected in the compose view
-$noinherit = true
-$ex = <C-x>
-<C-k> = :prev-field<Enter>
-<C-j> = :next-field<Enter>
-<C-p> = :prev-tab<Enter>
-<C-n> = :next-tab<Enter>
-
-[compose::review]
-# Keybindings used when reviewing a message to be sent
-y = :send<Enter>
-n = :abort<Enter>
-v = :preview<Enter>
-p = :postpone<Enter>
-q = :choose -o d discard abort -o p postpone postpone<Enter>
-e = :edit<Enter>
-a = :attach<space>
-d = :detach<space>
-
-[terminal]
-$noinherit = true
-$ex = <C-x>
-
-<C-p> = :prev-tab<Enter>
-<C-n> = :next-tab<Enter>
-
-[messages:account=gmail]
-d = :prompt 'Really move this message to the trash?' mv gmail/[Gmail]/Bin<Enter>
-D = :mv gmail/[Gmail]/Bin<Enter>
-
-[view:account=gmail]
-d = :prompt 'Really move this message to the trash?' mv gmail/[Gmail]/Bin<Enter>
-D = :mv gmail/[Gmail]/Bin<Enter>
-```
-
-`~/.config/aerc/stylesets/gruvbox`
-
-```
-# should work with any terminal colorscheme, but was designed for gruvbox
-# terminal colors are preferred, but hex is used for grayscale
-
-*.default=true
-
-# present in 'Send this email?' dialog
-title.fg=yellow
-title.bg=#303030
-title.bold=true
-
-# used in setup and in 'From:' etc
-header.bold=true
-header.fg=purple
-
-# decorative lines
-border.fg=blue
-
-# requires attention
-*error.bold=true
-*error.fg=red
-*error.blink=true
-*warning.fg=yellow
-*warning.blink=true
-*success.fg=green
-
-# statusline
-statusline_default.fg=gray
-statusline_*.bg=#303030
-
-# message list colors
-msglist_deleted.fg=gray
-msglist_unread.fg=#98971a
-msglist_unread.bold=true
-msglist_default.fg=#dedede
-msglist_marked.fg=yellow
-msglist_marked.reverse=true
-msglist_flagged.fg=white
-# msglist_flagged.bg=red
-msglist_flagged.bold=true
-
-# inbox etc
-dirlist_default.fg=#dedede
-dirlist_unread.fg=white
-dirlist_unread.bold=true
-
-# highlight selected item
-*.selected.bg=#303030
-*.selected.fg=#fabd2f
-*.selected.bold=true
-
-# primarily used in account setup
-selector_default.fg=gray
-selector_chooser.bold=true
-selector_focused.bg=green
-selector_focused.bold=true
-
-# command completion
-completion_default.bg=#303030
-completion_gutter.bg=#303030
-completion_pill.bg=aqua
-
-
-#dynamic
-*msglist_answered.fg = #21771f
-
-[viewer]
-header.fg=#d845c5
-header.bold=true    
-signature.fg=3   
-signature.dim=true    
-diff_meta.fg=#ff0000
-diff_meta.bold=true    
-diff_chunk.dim=true    
-diff_add.fg=#00ff00    
-diff_del.fg=#ff0000
-quote_1.fg=6    
-quote_2.fg=7
-quote_3.fg=6    
-quote_4.fg=7    
-quote_3.dim=true
-quote_4.dim=true
-quote_x.fg=gray
-quote_x.dim=true
-```
-
-`~/.msmtprc`
-
-```
-IMAPStore gmail-remote
-Host imap.gmail.com
-AuthMechs LOGIN
-User youremail@gmail.com
-PassCmd "pass Email/your@gmail.com/app-password"
-TLSType IMAPS
-
-MaildirStore gmail-local
-Path ~/.mail/gmail/
-Inbox ~/.mail/gmail/INBOX
-Subfolders Verbatim
-
-Channel gmail
-Far :gmail-remote:
-Near :gmail-local:
-Expunge Both
-Create Both
-Remove Both
-Patterns * !"[Gmail]/All Mail" !"[Gmail]/Important" !"[Gmail]/Starred"
-SyncState *
-```
-
-`~/.msmtprc`
-
-```
-defaults
-tls on
-
-account gmail
-auth on
-host smtp.gmail.com
-port 587
-user your@gmail.com
-from your@gmail.com
-passwordeval "pass Email/your@gmail.com/app-password"
-
-account default: gmail
-```
-
-
+<!doctype html>
+<html lang="en">
+<head>
+	<meta charset="utf-8">
+	<meta name="viewport" content="width=device-width, initial-scale=1">
+	<title>Justine Smithies blog - No Title</title>
+	<link rel="icon" href="public/favicon-32x32.png" type="image/png" sizes="32x32">
+	<link href="https://justine.smithies.me.uk/atom.xml" type="application/atom+xml" rel="alternate" title="Atom feed for blog posts">
+ <style> 
+		body {
+			font-family: sans-serif;
+			margin: 0 auto;
+			max-width: 48rem;
+			line-height: 1.45;
+			padding: 0.5rem 1.6rem;
+		}
+		a {
+			color: #000000;
+			font-weight: bold;
+		}
+		a:link {
+			text-decoration: none;
+		}
+		a:hover {
+			text-decoration: underline;
+		}
+		main {
+			padding: 0 1.4rem;
+			hyphens: auto;
+		}
+		code {	
+			border: 1px solid;
+			padding: 0.1rem 0.3rem;
+			tab-size: 4;
+		}
+		pre {
+			border: 1px solid;
+		}
+		pre code {
+			display: block;
+			overflow-x: auto;
+			padding: 0.3rem 0.6rem;
+		}
+		nav ul {
+			margin: 0;
+			padding: 0;
+			display: flex;
+			justify-content: center;
+		}
+		nav li {
+			list-style: none;
+		}
+		nav li * {
+			display: block;
+			padding: 0 0.4rem;
+			color: black;
+		}
+		nav li strong {
+			padding-left: 1.5rem;
+			padding-right: 1rem;
+		}
+		nav a {
+			text-decoration: none;
+		}
+		nav a:hover {
+			
+		}	
+		header {
+			border-bottom: 1px dashed grey;
+			margin: 0rem 0;
+			padding: 1rem 15px;
+			text-align: center;
+		}
+		footer {
+			border-top: 1px dashed grey;
+			margin: 2rem 0;
+			padding: 1rem 15px;
+			text-align: center;
+			color: #000000;
+		}
+	</style>
+</head>
+<body>
+<header>
+<nav>
+	<ul>
+		<li><img src="public/tux-1.png" alt="Tux" style="width:100px;height:100px;"></li>
+		<li><h1>Justine Smithies blog</h1>Adventures of a Linux, BSD chick</li>
+	</ul>
+	<ul>
+		<li><a href="index.html">Home</a></li>
+		<li><a href="about.html">About</a></li>
+	</ul>
+</nav>
+</header>
+<main>
+
+</main>
+<footer>
+  <small>
+    <span><a href="#">↑ Back to Top</a></span><br><br>
+    Powered by <a href="https://www.freebsd.org/">FreeBSD</a><br>
+    Built with <a href="https://git.smithies.me.uk/blarg">blarg</a> a mix of both <a
+      href="https://github.com/karlb/karl.berlin/tree/master">blog.sh</a> and <b>barf</b>.
+    The code for this site is licensed under <a
+      href="https://git.smithies.me.uk/blarg/tree/LICENSE">MIT</a>. <br>
+    Here's the blog's <a href="atom.xml">Atom feed</a>. <br><br>
+    <img src="./public/fediverse.png" alt="Smithies SNAC Instance" width="16" height="16" style="vertical-align:middle;">
+    <a rel="me" href="https://snac.smithies.me.uk/justine">Fediverse</a>
+    <img src="./public/git.png" alt="Self Hosted" width="16" height="16" style="vertical-align:middle;">
+    <a href="https://git.smithies.me.uk">Git</a>
+    <img src="./public/email.png" alt="Email" width="16" height="16" style="vertical-align:middle;">
+    <a href="mailto:justine@smithies.me.uk">Email</a><br>
+    ©2022 - 2024 Justine Smithies
+  </small>
+</footer>
+</body>
+</html>